Journal Description
Sensors
Sensors
is an international, peer-reviewed, open access journal on the science and technology of sensors. Sensors is published semimonthly online by MDPI. The Polish Society of Applied Electromagnetics (PTZE), Japan Society of Photogrammetry and Remote Sensing (JSPRS), Spanish Society of Biomedical Engineering (SEIB) and International Society for the Measurement of Physical Behaviour (ISMPB) are affiliated with Sensors and their members receive a discount on the article processing charges.
- Open Access — free for readers, with article processing charges (APC) paid by authors or their institutions.
- High Visibility: indexed within Scopus, SCIE (Web of Science), PubMed, MEDLINE, PMC, Ei Compendex, Inspec, Astrophysics Data System, and other databases.
- Journal Rank: JCR - Q2 (Instruments & Instrumentation) / CiteScore - Q1 (Instrumentation)
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 17 days after submission; acceptance to publication is undertaken in 2.8 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
- Testimonials: See what our editors and authors say about Sensors.
- Companion journals for Sensors include: Chips, Automation, JCP and Targets.
Impact Factor:
3.9 (2022);
5-Year Impact Factor:
4.1 (2022)
Latest Articles
Optimizing Human–Robot Teaming Performance through Q-Learning-Based Task Load Adjustment and Physiological Data Analysis
Sensors 2024, 24(9), 2817; https://doi.org/10.3390/s24092817 (registering DOI) - 28 Apr 2024
Abstract
The transition to Industry 4.0 and 5.0 underscores the need for integrating humans into manufacturing processes, shifting the focus towards customization and personalization rather than traditional mass production. However, human performance during task execution may vary. To ensure high human–robot teaming (HRT) performance,
[...] Read more.
The transition to Industry 4.0 and 5.0 underscores the need for integrating humans into manufacturing processes, shifting the focus towards customization and personalization rather than traditional mass production. However, human performance during task execution may vary. To ensure high human–robot teaming (HRT) performance, it is crucial to predict performance without negatively affecting task execution. Therefore, to predict performance indirectly, significant factors affecting human performance, such as engagement and task load (i.e., amount of cognitive, physical, and/or sensory resources required to perform a particular task), must be considered. Hence, we propose a framework to predict and maximize the HRT performance. For the prediction of task performance during the development phase, our methodology employs features extracted from physiological data as inputs. The labels for these predictions—categorized as accurate performance or inaccurate performance due to high/low task load—are meticulously crafted using a combination of the NASA TLX questionnaire, records of human performance in quality control tasks, and the application of Q-Learning to derive task-specific weights for the task load indices. This structured approach enables the deployment of our model to exclusively rely on physiological data for predicting performance, thereby achieving an accuracy rate of 95.45% in forecasting HRT performance. To maintain optimized HRT performance, this study further introduces a method of dynamically adjusting the robot’s speed in the case of low performance. This strategic adjustment is designed to effectively balance the task load, thereby enhancing the efficiency of human–robot collaboration.
Full article
(This article belongs to the Special Issue Sensors in 2024)
Open AccessArticle
Vision-Based On-Site Construction Waste Localization Using Unmanned Aerial Vehicle
by
Zeli Wang, Xincong Yang, Xianghan Zheng and Heng Li
Sensors 2024, 24(9), 2816; https://doi.org/10.3390/s24092816 (registering DOI) - 28 Apr 2024
Abstract
In the context of construction and demolition waste exacerbating environmental pollution, the lack of recycling technology has hindered the green development of the industry. Previous studies have explored robot-based automated recycling methods, but their efficiency is limited by movement speed and detection range,
[...] Read more.
In the context of construction and demolition waste exacerbating environmental pollution, the lack of recycling technology has hindered the green development of the industry. Previous studies have explored robot-based automated recycling methods, but their efficiency is limited by movement speed and detection range, so there is an urgent need to integrate drones into the recycling field to improve construction waste management efficiency. Preliminary investigations have shown that previous construction waste recognition techniques are ineffective when applied to UAVs and also lack a method to accurately convert waste locations in images to actual coordinates. Therefore, this study proposes a new method for autonomously labeling the location of construction waste using UAVs. Using images captured by UAVs, we compiled an image dataset and proposed a high-precision, long-range construction waste recognition algorithm. In addition, we proposed a method to convert the pixel positions of targets to actual positions. Finally, the study verified the effectiveness of the proposed method through experiments. Experimental results demonstrated that the approach proposed in this study enhanced the discernibility of computer vision algorithms towards small targets and high-frequency details within images. In a construction waste localization task using drones, involving high-resolution image recognition, the accuracy and recall were significantly improved by about 2% at speeds of up to 28 fps. The results of this study can guarantee the efficient application of drones to construction sites.
Full article
(This article belongs to the Section Internet of Things)
►▼
Show Figures
Figure 1
Open AccessArticle
Electro-Mechanical Characterization and Modeling of a Broadband Piezoelectric Microgenerator Based on Lithium Niobate
by
Namanu Panayanthatta, Giacomo Clementi, Merieme Ouhabaz, Samuel Margueron, Ausrine Bartasyte, Mickael Lallart, Skandar Basrour, Roberto La Rosa, Edwige Bano and Laurent Montes
Sensors 2024, 24(9), 2815; https://doi.org/10.3390/s24092815 (registering DOI) - 28 Apr 2024
Abstract
Vibration energy harvesting based on piezoelectric transducers is an attractive choice to replace single-use batteries in powering Wireless Sensor Nodes (WSNs). As of today, their widespread application is hindered due to low operational bandwidth and the conventional use of lead-based materials. The Restriction
[...] Read more.
Vibration energy harvesting based on piezoelectric transducers is an attractive choice to replace single-use batteries in powering Wireless Sensor Nodes (WSNs). As of today, their widespread application is hindered due to low operational bandwidth and the conventional use of lead-based materials. The Restriction of Hazardous Substances legislation (RoHS) implemented in the European Union restricts the use of lead-based piezoelectric materials in future electronic devices. This paper investigates lithium niobate ( ) as a lead-free material for a high-performance broadband Piezoelectric Energy Harvester (PEH). A single-clamped, cantilever beam-based piezoelectric microgenerator with a mechanical footprint of 1 cm2, working at a low resonant frequency of 200 Hz, with a high piezoelectric coupling coefficient and broad bandwidth, was designed and microfabricated, and its performance was evaluated. The PEH device, with an acceleration of 1 g delivers a maximum output RMS power of nearly 35 μW/cm2 and a peak voltage of 6 V for an optimal load resistance at resonance. Thanks to a high squared piezoelectric electro-mechanical coupling coefficient ( ), the device offers a broadband operating frequency range above 10% of the central frequency. The Mason electro-mechanical equivalent circuit was derived, and a SPICE model of the device was compared with experimental results. Finally, the output voltage of the harvester was rectified to provide a DC output stored on a capacitor, and it was regulated and used to power an IoT node at an acceleration of as low as 0.5 g.
Full article
(This article belongs to the Section Physical Sensors)
►▼
Show Figures
Figure 1
Open AccessArticle
Driving toward Connectivity: Vehicular Visible Light Communications Receiver with Adaptive Field of View for Enhanced Noise Resilience and Mobility
by
Alin-Mihai Căilean, Sebastian-Andrei Avătămăniței and Cătălin Beguni
Sensors 2024, 24(9), 2814; https://doi.org/10.3390/s24092814 (registering DOI) - 28 Apr 2024
Abstract
Wireless communication represents the basis for the next generation of vehicle safety systems, whereas visible light communication (VLC) is one of the most suitable technologies for this purpose. In this context, this work introduces a novel VLC receiver architecture that integrates a field-of-view
[...] Read more.
Wireless communication represents the basis for the next generation of vehicle safety systems, whereas visible light communication (VLC) is one of the most suitable technologies for this purpose. In this context, this work introduces a novel VLC receiver architecture that integrates a field-of-view (FoV) adaptation mechanism in accordance with the optical noise generated by the sun. In order to demonstrate the benefits of this concept, a VLC prototype was experimentally tested in an infrastructure-to-vehicle (I2V) VLC configuration, which uses an LED traffic light as the transmitter. At the receiver side, an automatic FoV adaptation mechanism was designed based on a mechanical iris placed in front of a photodetector. Adjustments were made based on the values recorded by a multi-angle light sensor, built with an array of IR photodiodes covering an elevation from 0° to 30° and an azimuth from −30° to 30°. Depending on the incidence of solar light, the mechanical iris can adjust the FoV from ±1° to ±22°, taking into account both the light irradiance and the sun’s position relative to the VLC receiver. For experimental testing, two identical VLC receivers were used: one with an automatic FoV adjustment, and the other with a ±22° fixed FoV. The test results performed at a distance of 50 m, in the presence of solar irradiance reaching up to 67,000 µW/cm2, showed that the receiver with a fixed FoV saturated and lost the communication link most of the time, whereas the receiver with an adjustable FoV maintained an active link throughout the entire period, with a bit error rate (BER) of less than 10−7.
Full article
(This article belongs to the Special Issue Advances in Intelligent Transportation Systems Based on Sensor Fusion)
►▼
Show Figures
Figure 1
Open AccessArticle
RadarTCN: Lightweight Online Classification Network for Automotive Radar Targets Based on TCN
by
Yuan Li, Mengmeng Zhang, Hongyuan Jing and Zhi Liu
Sensors 2024, 24(9), 2813; https://doi.org/10.3390/s24092813 (registering DOI) - 28 Apr 2024
Abstract
Automotive radar is one of the key sensors for intelligent driving. Radar image sequences contain abundant spatial and temporal information, enabling target classification. For existing radar spatiotemporal classifiers, multi-view radar images are usually employed to enhance the information of the target and 3D
[...] Read more.
Automotive radar is one of the key sensors for intelligent driving. Radar image sequences contain abundant spatial and temporal information, enabling target classification. For existing radar spatiotemporal classifiers, multi-view radar images are usually employed to enhance the information of the target and 3D convolution is employed for spatiotemporal feature extraction. These models consume significant hardware resources and are not applicable to real-time applications. In this paper, RadarTCN, a novel lightweight network, is proposed that achieves high-accuracy online target classification using single-view radar image sequences only. In RadarTCN, 2D convolution and 3D-TCN are employed to extract spatiotemporal features sequentially. To reduce data dimensionality and computational complexity, a multi-layer max pooling down-sampling method is designed in a 2D convolution module. Meanwhile, the 3D-TCN module is improved through residual pruning and causal convolution is introduced for leveraging the performance of online target classification. The experimental results demonstrate that RadarTCN can achieve high-precision online target recognition for both range-angle and range-Doppler map sequences. Compared to the reference models on the CARRADA dataset, RadarTCN exhibits better classification performance, with fewer parameters and lower computational complexity.
Full article
(This article belongs to the Section Radar Sensors)
Open AccessArticle
Minimizing Task Age upon Decision for Low-Latency MEC Networks Task Offloading with Action-Masked Deep Reinforcement Learning
by
Zhouxi Jiang, Jianfeng Yang and Xun Gao
Sensors 2024, 24(9), 2812; https://doi.org/10.3390/s24092812 (registering DOI) - 28 Apr 2024
Abstract
In this paper, we consider a low-latency Mobile Edge Computing (MEC) network where multiple User Equipment (UE) wirelessly reports to a decision-making edge server. At the same time, the transmissions are operated with Finite Blocklength (FBL) codes to achieve low-latency transmission. We introduce
[...] Read more.
In this paper, we consider a low-latency Mobile Edge Computing (MEC) network where multiple User Equipment (UE) wirelessly reports to a decision-making edge server. At the same time, the transmissions are operated with Finite Blocklength (FBL) codes to achieve low-latency transmission. We introduce the task of Age upon Decision (AuD) aimed at the timeliness of tasks used for decision-making, which highlights the timeliness of the information at decision-making moments. For the case in which dynamic task generation and random fading channels are considered, we provide a task AuD minimization design by jointly selecting UE and allocating blocklength. In particular, to solve the task AuD minimization problem, we transform the optimization problem to a Markov Decision Process problem and propose an Error Probability-Controlled Action-Masked Proximal Policy Optimization (EMPPO) algorithm. Via simulation, we show that the proposed design achieves a lower AuD than baseline methods across various network conditions, especially in scenarios with significant channel Signal-to-Noise Ratio (SNR) differences and low average SNR, which shows the robustness of EMPPO and its potential for real-time applications.
Full article
(This article belongs to the Special Issue Edge Computing in IoT Networks Based on Artificial Intelligence)
►▼
Show Figures
Figure 1
Open AccessArticle
Classification of Sleep Quality and Aging as a Function of Brain Complexity: A Multiband Non-Linear EEG Analysis
by
Lucía Penalba-Sánchez, Gabriel Silva, Mark Crook-Rumsey, Alexander Sumich, Pedro Miguel Rodrigues, Patrícia Oliveira-Silva and Ignacio Cifre
Sensors 2024, 24(9), 2811; https://doi.org/10.3390/s24092811 (registering DOI) - 28 Apr 2024
Abstract
Understanding and classifying brain states as a function of sleep quality and age has important implications for developing lifestyle-based interventions involving sleep hygiene. Current studies use an algorithm that captures non-linear features of brain complexity to differentiate awake electroencephalography (EEG) states, as a
[...] Read more.
Understanding and classifying brain states as a function of sleep quality and age has important implications for developing lifestyle-based interventions involving sleep hygiene. Current studies use an algorithm that captures non-linear features of brain complexity to differentiate awake electroencephalography (EEG) states, as a function of age and sleep quality. Fifty-eight participants were assessed using the Pittsburgh Sleep Quality Inventory (PSQI) and awake resting state EEG. Groups were formed based on age and sleep quality (younger adults n = 24, mean age = 24.7 years, SD = 3.43, good sleepers n = 11; older adults n = 34, mean age = 72.87; SD = 4.18, good sleepers n = 9). Ten non-linear features were extracted from multiband EEG analysis to feed several classifiers followed by a leave-one-out cross-validation. Brain state complexity accurately predicted (i) age in good sleepers, with 75% mean accuracy (across all channels) for lower frequencies (alpha, theta, and delta) and 95% accuracy at specific channels (temporal, parietal); and (ii) sleep quality in older groups with moderate accuracy (70 and 72%) across sub-bands with some regions showing greater differences. It also differentiated younger good sleepers from older poor sleepers with 85% mean accuracy across all sub-bands, and 92% at specific channels. Lower accuracy levels (<50%) were achieved in predicting sleep quality in younger adults. The algorithm discriminated older vs. younger groups excellently and could be used to explore intragroup differences in older adults to predict sleep intervention efficiency depending on their brain complexity.
Full article
(This article belongs to the Special Issue Recent Advances in the Acquisition and Processing of Biomedical Signals and Images)
►▼
Show Figures
Figure 1
Open AccessArticle
3D Shape Measurement of Aeroengine Blade Based on Fringe Projection Profilometer Improved by Multi-Layer Concentric Ring Calibration
by
Ze Chen, Yuhang Ju, Chuanzhi Sun, Yinchu Wang, Yongmeng Liu and Jiubin Tan
Sensors 2024, 24(9), 2810; https://doi.org/10.3390/s24092810 (registering DOI) - 28 Apr 2024
Abstract
The precision requirements for aeroengine blade machining are exceedingly stringent. This study aims to improve the accuracy of existing aeroengine blade measurement methods while achieving comprehensive measurement. Therefore, this study proposes a new concentric ring calibration method and designs a multi-layer concentric ring
[...] Read more.
The precision requirements for aeroengine blade machining are exceedingly stringent. This study aims to improve the accuracy of existing aeroengine blade measurement methods while achieving comprehensive measurement. Therefore, this study proposes a new concentric ring calibration method and designs a multi-layer concentric ring calibration plate. The effectiveness of this calibration method was verified through actual testing of standard ball gauges. Compared with the checkerboard-grid calibration method, the average deviation of the multilayer concentric ring calibration method for measuring the center distance of the standard sphere is 0.02352, which improves the measurement accuracy by 3–4 times. On the basis of multi-layer concentric ring calibration, this study builds a fringe projection profiler based on the three-frequency twelve-step phase shift method. Compared with the CMM, the average deviation of the blade chord length measured by this solution is 0.064, which meets the measurement index requirements of aeroengine fan blades.
Full article
(This article belongs to the Collection 3D/4D Optical Imaging Sensors for Surface Measurement, Processing and Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
Use of Unmanned Surface Vehicles (USVs) in Water Chemistry Studies
by
Georgios Katsouras, Elias Dimitriou, Sotirios Karavoltsos, Stylianos Samios, Aikaterini Sakellari, Angeliki Mentzafou, Nikolaos Tsalas and Michael Scoullos
Sensors 2024, 24(9), 2809; https://doi.org/10.3390/s24092809 (registering DOI) - 28 Apr 2024
Abstract
Unmanned surface vehicles (USVs) equipped with integrated sensors are a tool valuable to several monitoring strategies, offering enhanced temporal and spatial coverage over specific timeframes, allowing for targeted examination of sites or events of interest. The elaboration of environmental monitoring programs has relied
[...] Read more.
Unmanned surface vehicles (USVs) equipped with integrated sensors are a tool valuable to several monitoring strategies, offering enhanced temporal and spatial coverage over specific timeframes, allowing for targeted examination of sites or events of interest. The elaboration of environmental monitoring programs has relied so far on periodic spot sampling at specific locations, followed by laboratory analysis, aiming at the evaluation of water quality at a catchment scale. For this purpose, automatic telemetric stations for specific parameters have been installed by the Institute of Marine Biological Resources and Inland Waters of Hellenic Centre for Marine Research (IMBRIW-HCMR) within several Greek rivers and lakes, providing continuous and temporal monitoring possibilities. In the present work, USVs were deployed by the Athens Water and Sewerage Company (EYDAP) as a cost-effective tool for the environmental monitoring of surface water bodies of interest, with emphasis on the spatial fluctuations of chlorophyll α, electrical conductivity, dissolved oxygen and pH, observed in Koumoundourou Lake and the rivers Acheloos, Asopos and Kifissos. The effectiveness of an innovative heavy metal (HM) system installed in the USV for the in situ measurements of copper and lead was also evaluated herewith. The results obtained demonstrate the advantages of USVs, setting the base for their application in real-time monitoring of chemical parameters including metals. Simultaneously, the requirements for accuracy and sensitivity improvement of HM sensors were noted, in order to permit full exploitation of USVs’ capacities.
Full article
(This article belongs to the Section Remote Sensors)
►▼
Show Figures
Figure 1
Open AccessArticle
High-Performance Four-Channel Tactile Sensor for Measuring the Magnitude and Orientation of Forces
by
Mingyao Zhang, Yong Shi, Haitao Ge, Guopeng Sun, Zihan Lian and Yifei Lu
Sensors 2024, 24(9), 2808; https://doi.org/10.3390/s24092808 (registering DOI) - 28 Apr 2024
Abstract
Flexible sensors have gained popularity in recent years. This study proposes a novel structure of a resistive four-channel tactile sensor capable of distinguishing the magnitude and direction of normal forces acting on its sensing surface. The sensor uses EcoflexTM00-30 as the
[...] Read more.
Flexible sensors have gained popularity in recent years. This study proposes a novel structure of a resistive four-channel tactile sensor capable of distinguishing the magnitude and direction of normal forces acting on its sensing surface. The sensor uses EcoflexTM00-30 as the substrate and EGaIn alloy as the conductive filler, featuring four mutually perpendicular and curved channels to enhance the sensor’s dynamic responsiveness. Experiments and simulations show that the sensor has a large dynamic range (31.25–100 mΩ), high precision (deviation of repeated pressing below 0.1%), linearity (R2 above 0.97), fast response/recovery time (0.2 s/0.15 s), and robust stability (with fluctuations below 0.9%). This work uses an underactuated robotic hand equipped with a four-channel tactile sensor to grasp various objects. The sensor data collected effectively predicts the shapes of the objects grasped. Furthermore, the four-channel tactile sensor proposed in this work may be employed in smart wearables, medical diagnostics, and other industries.
Full article
(This article belongs to the Section Sensors Development)
►▼
Show Figures
Figure 1
Open AccessArticle
A Novel Architecture for an Intrusion Detection System Utilizing Cross-Check Filters for In-Vehicle Networks
by
Hyungchul Im, Donghyeon Lee and Seongsoo Lee
Sensors 2024, 24(9), 2807; https://doi.org/10.3390/s24092807 (registering DOI) - 28 Apr 2024
Abstract
The Controller Area Network (CAN), widely used for vehicular communication, is vulnerable to multiple types of cyber-threats. Attackers can inject malicious messages into the CAN bus through various channels, including wireless methods, entertainment systems, and on-board diagnostic ports. Therefore, it is crucial to
[...] Read more.
The Controller Area Network (CAN), widely used for vehicular communication, is vulnerable to multiple types of cyber-threats. Attackers can inject malicious messages into the CAN bus through various channels, including wireless methods, entertainment systems, and on-board diagnostic ports. Therefore, it is crucial to develop a reliable intrusion detection system (IDS) capable of effectively distinguishing between legitimate and malicious CAN messages. In this paper, we propose a novel IDS architecture aimed at enhancing the cybersecurity of CAN bus systems in vehicles. Various machine learning (ML) models have been widely used to address similar problems; however, although existing ML-based IDS are computationally efficient, they suffer from suboptimal detection performance. To mitigate this shortcoming, our architecture incorporates specially designed rule-based filters that cross-check outputs from the traditional ML-based IDS. These filters scrutinize message ID and payload data to precisely capture the unique characteristics of three distinct types of cyberattacks: DoS attacks, spoofing attacks, and fuzzy attacks. Experimental evidence demonstrates that the proposed architecture leads to a significant improvement in detection performance across all utilized ML models. Specifically, all ML-based IDS achieved an accuracy exceeding 99% for every type of attack. This achievement highlights the robustness and effectiveness of our proposed solution in detecting potential threats.
Full article
(This article belongs to the Section Vehicular Sensing)
►▼
Show Figures
Figure 1
Open AccessArticle
Online Detection of Hydrogen Fluoride under Corona Discharge in Gas-Insulated Switchgear Based on Photoacoustic Spectroscopy
by
Liujie Wan, Xiaohe Zhao and Kang Li
Sensors 2024, 24(9), 2806; https://doi.org/10.3390/s24092806 (registering DOI) - 27 Apr 2024
Abstract
Internal discharge and overheating faults in sulfur hexafluoride (SF6) gas-insulated electrical equipment will generate a series of characteristic gas products. Hydrogen fluoride (HF) is one of the main decomposition gases under discharge failure. Because of its extremely corrosive nature, it can
[...] Read more.
Internal discharge and overheating faults in sulfur hexafluoride (SF6) gas-insulated electrical equipment will generate a series of characteristic gas products. Hydrogen fluoride (HF) is one of the main decomposition gases under discharge failure. Because of its extremely corrosive nature, it can react with other materials in gas-insulated switchgear (GIS), resulting in a short existence time, so it needs to be detected online. Resonant gas photoacoustic spectroscopy has the advantage of high sensitivity, fast response, and no sample gas consumption, and can be used for the online detection of flowing gas. In this paper, a simulated GIS corona discharge experimental platform was built, and the HF generated in the discharge was detected online by gas photoacoustic spectroscopy. The absorption peak of HF molecule near 1312.59 nm was selected as the absorption spectral line, and a resonant photoacoustic cell was designed. To improve the detection sensitivity of HF, wavelength modulation and second-harmonic detection technology were used. The online monitoring of HF in the simulated GIS corona discharge fault was successfully realized. The experimental results show that the sensitivity of the designed photoacoustic spectroscopy detection system for HF is 0.445 μV/(μL/L), and the limit of detection (LOD) is 0.611 μL/L.
Full article
(This article belongs to the Special Issue Photoacoustic Sensors and Devices for Gas Detection)
Open AccessArticle
Combining the Benefits of Biotin–Streptavidin Aptamer Immobilization with the Versatility of Ni-NTA Regeneration Strategies for SPR
by
Eliza K. Hanson and Rebecca J. Whelan
Sensors 2024, 24(9), 2805; https://doi.org/10.3390/s24092805 (registering DOI) - 27 Apr 2024
Abstract
The high affinity of the biotin–streptavidin interaction has made this non-covalent coupling an indispensable strategy for the immobilization and enrichment of biomolecular affinity reagents. However, the irreversible nature of the biotin–streptavidin bond renders surfaces functionalized using this strategy permanently modified and not amenable
[...] Read more.
The high affinity of the biotin–streptavidin interaction has made this non-covalent coupling an indispensable strategy for the immobilization and enrichment of biomolecular affinity reagents. However, the irreversible nature of the biotin–streptavidin bond renders surfaces functionalized using this strategy permanently modified and not amenable to regeneration strategies that could increase assay reusability and throughput. To increase the utility of biotinylated targets, we here introduce a method for reversibly immobilizing biotinylated thrombin-binding aptamers onto a Ni-nitrilotriacetic acid (Ni-NTA) sensor chip using 6xHis-tagged streptavidin as a regenerable capture ligand. This approach enabled the reproducible immobilization of aptamers and measurements of aptamer–protein interaction in a surface plasmon resonance assay. The immobilized aptamer surface was stable during five experiments over two days, despite the reversible attachment of 6xHis-streptavidin to the Ni-NTA surface. In addition, we demonstrate the reproducibility of this immobilization method and the affinity assays performed using it. Finally, we verify the specificity of the biotin tag–streptavidin interaction and assess the efficiency of a straightforward method to regenerate and reuse the surface. The method described here will allow researchers to leverage the versatility and stability of the biotin–streptavidin interaction while increasing throughput and improving assay efficiency.
Full article
(This article belongs to the Special Issue Surface Plasmon Resonance-Based Biosensor)
Open AccessArticle
Developing a Novel Ontology for Cybersecurity in Internet of Medical Things-Enabled Remote Patient Monitoring
by
Kulsoom S. Bughio, David M. Cook and Syed Afaq A. Shah
Sensors 2024, 24(9), 2804; https://doi.org/10.3390/s24092804 (registering DOI) - 27 Apr 2024
Abstract
IoT has seen remarkable growth, particularly in healthcare, leading to the rise of IoMT. IoMT integrates medical devices for real-time data analysis and transmission but faces challenges in data security and interoperability. This research identifies a significant gap in the existing literature regarding
[...] Read more.
IoT has seen remarkable growth, particularly in healthcare, leading to the rise of IoMT. IoMT integrates medical devices for real-time data analysis and transmission but faces challenges in data security and interoperability. This research identifies a significant gap in the existing literature regarding a comprehensive ontology for vulnerabilities in medical IoT devices. This paper proposes a fundamental domain ontology named MIoT (Medical Internet of Things) ontology, focusing on cybersecurity in IoMT (Internet of Medical Things), particularly in remote patient monitoring settings. This research will refer to similar-looking acronyms, IoMT and MIoT ontology. It is important to distinguish between the two. IoMT is a collection of various medical devices and their applications within the research domain. On the other hand, MIoT ontology refers to the proposed ontology that defines various concepts, roles, and individuals. MIoT ontology utilizes the knowledge engineering methodology outlined in Ontology Development 101, along with the structured life cycle, and establishes semantic interoperability among medical devices to secure IoMT assets from vulnerabilities and cyberattacks. By defining key concepts and relationships, it becomes easier to understand and analyze the complex network of information within the IoMT. The MIoT ontology captures essential key terms and security-related entities for future extensions. A conceptual model is derived from the MIoT ontology and validated through a case study. Furthermore, this paper outlines a roadmap for future research, highlighting potential impacts on security automation in healthcare applications.
Full article
(This article belongs to the Section Internet of Things)
Open AccessArticle
In-Laboratory Polysomnography Worsens Obstructive Sleep Apnea by Changing Body Position Compared to Home Testing
by
Raquel Chartuni Pereira Teixeira and Michel Burihan Cahali
Sensors 2024, 24(9), 2803; https://doi.org/10.3390/s24092803 (registering DOI) - 27 Apr 2024
Abstract
(1) Background: Home sleep apnea testing, known as polysomnography type 3 (PSG3), underestimates respiratory events in comparison with in-laboratory polysomnography type 1 (PSG1). Without head electrodes for scoring sleep and arousal, in a home environment, patients feel unfettered and move their bodies more
[...] Read more.
(1) Background: Home sleep apnea testing, known as polysomnography type 3 (PSG3), underestimates respiratory events in comparison with in-laboratory polysomnography type 1 (PSG1). Without head electrodes for scoring sleep and arousal, in a home environment, patients feel unfettered and move their bodies more naturally. Adopting a natural position may decrease obstructive sleep apnea (OSA) severity in PSG3, independently of missing hypopneas associated with arousals. (2) Methods: Patients with suspected OSA performed PSG1 and PSG3 in a randomized sequence. We performed an additional analysis, called reduced polysomnography, in which we blindly reassessed all PSG1 tests to remove electroencephalographic electrodes, electrooculogram, and surface electromyography data to estimate the impact of not scoring sleep and arousal-based hypopneas on the test results. A difference of 15 or more in the apnea–hypopnea index (AHI) between tests was deemed clinically relevant. We compared the group of patients with and without clinically relevant differences between lab and home tests (3) Results: As expected, by not scoring sleep, there was a decrease in OSA severity in the lab test, similar to the home test results. The group of patients with clinically relevant differences between lab and home tests presented more severe OSA in the lab compared to the other group (mean AHI, 42.5 vs. 20.2 events/h, p = 0.002), and this difference disappeared in the home test. There was no difference between groups in the shift of OSA severity by abolishing sleep scoring in the lab. However, by comparing lab and home tests, there were greater variations in supine AHI and time spent in the supine position in the group with a clinically relevant difference, either with or without scoring sleep, showing an impact of the site of the test on body position during sleep. These variations presented as a marked increase or decrease in supine outcomes according to the site of the test, with no particular trend. (4) Conclusions: In-lab polysomnography may artificially increase OSA severity in a subset of patients by inducing marked changes in body position compared to home tests. The location of the sleep test seems to interfere with the evaluation of patients with more severe OSA.
Full article
(This article belongs to the Special Issue Sensors for Breathing Monitoring)
Open AccessArticle
Advanced Detection of Failed LEDs in a Short Circuit for Automotive Lighting Applications
by
Jose R. Martínez-Pérez, Miguel A. Carvajal, Juan J. Santaella, Nuria López-Ruiz, Pablo Escobedo and Antonio Martínez-Olmos
Sensors 2024, 24(9), 2802; https://doi.org/10.3390/s24092802 (registering DOI) - 27 Apr 2024
Abstract
This paper addresses the issue of LED short-circuit fault detection in signaling and lighting systems in the automotive industry. The conventional diagnostic method commonly implemented in newer vehicles relies on measuring the voltage drop across different LED branches and comparing it with threshold
[...] Read more.
This paper addresses the issue of LED short-circuit fault detection in signaling and lighting systems in the automotive industry. The conventional diagnostic method commonly implemented in newer vehicles relies on measuring the voltage drop across different LED branches and comparing it with threshold values indicating faults caused by open circuits or LED short circuits. With this algorithm, detecting cases of a few LEDs short-circuited within a branch, particularly a single malfunctioning LED, is particularly challenging. In this work, two easily implementable algorithms are proposed to address this issue within the vehicle’s control unit. One is based on a mathematical prediction model, while the other utilizes a neural network. The results obtained offer a 100% LED short-circuit fault detection rate in the majority of analyzed cases, representing a significant improvement over the conventional method, even in scenarios involving a single malfunctioning LED within a branch. Additionally, the neural network-based model can accurately predict the number of failed LEDs.
Full article
(This article belongs to the Section Industrial Sensors)
Open AccessArticle
Low-Complexity 2D-DOD and 2D-DOA Estimation in Bistatic MIMO Radar Systems: A Reduced-Dimension MUSIC Algorithm Approach
by
Mushtaq Ahmad, Xiaofei Zhang, Xin Lai, Farman Ali and Xinlei Shi
Sensors 2024, 24(9), 2801; https://doi.org/10.3390/s24092801 (registering DOI) - 27 Apr 2024
Abstract
This paper presents a new technique for estimating the two-dimensional direction of departure (2D-DOD) and direction of arrival (2D-DOA) in bistatic uniform planar array Multiple-Input Multiple-Output (MIMO) radar systems. The method is based on the reduced-dimension (RD) MUSIC algorithm, aiming to achieve improved
[...] Read more.
This paper presents a new technique for estimating the two-dimensional direction of departure (2D-DOD) and direction of arrival (2D-DOA) in bistatic uniform planar array Multiple-Input Multiple-Output (MIMO) radar systems. The method is based on the reduced-dimension (RD) MUSIC algorithm, aiming to achieve improved precision and computational efficiency. Primarily, this pioneering approach efficiently transforms the four-dimensional (4D) estimation problem into two-dimensional (2D) searches, thus reducing the computational complexity typically associated with conventional MUSIC algorithms. Then, exploits the spatial diversity of array response vectors to construct a 4D spatial spectrum function, which is crucial in resolving the complex angular parameters of multiple simultaneous targets. Finally, the objective is to simplify the spatial spectrum to a 2D search within a 4D measurement space to achieve an optimal balance between efficiency and accuracy. Simulation results validate the effectiveness of our proposed algorithm compared to several existing approaches, demonstrating its robustness in accurately estimating 2D-DOD and 2D-DOA across various scenarios. The proposed technique shows significant computational savings and high-resolution estimations and maintains high precision, setting a new benchmark for future explorations in the field.
Full article
(This article belongs to the Topic Advanced Array Signal Processing for B5G/6G: Models, Algorithms, and Applications)
Open AccessArticle
Experimental Testing on Tuned Liquid Dampers for Implementation in Industrial Chimneys
by
Giancarlo Marulli and Carlos Moutinho
Sensors 2024, 24(9), 2800; https://doi.org/10.3390/s24092800 (registering DOI) - 27 Apr 2024
Abstract
A TLD is a passive damping device that works by dissipating energy through the sloshing of the liquid and the effect of wave breaking, thereby controlling the vibrations of the structure. One of the applications where TLDs are of great interest is in
[...] Read more.
A TLD is a passive damping device that works by dissipating energy through the sloshing of the liquid and the effect of wave breaking, thereby controlling the vibrations of the structure. One of the applications where TLDs are of great interest is in the case of industrial chimneys since these structures often have a very low natural frequency, which can be easily achieved in a control device of this type. The main objective of this study is to evaluate the behaviour of an annular TLD composed of multiple cells through laboratory tests and investigate if it is adequate to design it as an agglomeration of smaller rectangular TLDs. The influence of the amplitude of displacement on the behaviour of the annular TLD will also be analysed. The tests were performed on a shaking table and recurring with pendulums of the same length but of different masses. Three reservoirs were studied as TLDs: a rectangular one, a cell of an annular TLD and a quarter-ring of an annular TLD. This study concluded that the analytical methods developed in previous studies were, in general, adequate for the design of a rectangular TLD and that it was reasonable to design the annular TLD studied as a combination of rectangular ones, as its cells were a close match to a rectangle of similar dimensions. It was also concluded that a compartmentalised annular TLD is an adequate solution for the vibration control of structures with high displacements.
Full article
(This article belongs to the Special Issue Novel Sensors for Structural Health Monitoring)
Open AccessArticle
An End-to-End Artificial Intelligence of Things (AIoT) Solution for Protecting Pipeline Easements against External Interference—An Australian Use-Case
by
Umair Iqbal, Johan Barthelemy and Guillaume Michal
Sensors 2024, 24(9), 2799; https://doi.org/10.3390/s24092799 (registering DOI) - 27 Apr 2024
Abstract
High-pressure pipelines are critical for transporting hazardous materials over long distances, but they face threats from third-party interference activities. Preventive measures are implemented, but interference accidents can still occur, making the need for high-quality detection strategies vital. This paper proposes an end-to-end Artificial
[...] Read more.
High-pressure pipelines are critical for transporting hazardous materials over long distances, but they face threats from third-party interference activities. Preventive measures are implemented, but interference accidents can still occur, making the need for high-quality detection strategies vital. This paper proposes an end-to-end Artificial Intelligence of Things (AIoT) solution to detect potential interference threats in real time. The solution involves developing a smart visual sensor capable of processing images using state-of-the-art computer vision algorithms and transmitting alerts to pipeline operators in real time. The system’s core is based on the object-detection model (e.g., You Only Look Once version 4 (YOLOv4) and DETR with Improved deNoising anchOr boxes (DINO)), trained on a custom Pipeline Visual Threat Assessment (Pipe-VisTA) dataset. Among the trained models, DINO was able to achieve the best Mean Average Precision (mAP) of 71.2% for the unseen test dataset. However, for the deployment on a limited computational-ability edge computer (i.e., the NVIDIA Jetson Nano), the simpler and TensorRT-optimized YOLOv4 model was used, which achieved a mAP of 61.8% for the test dataset. The developed AIoT device captures the image using a camera, processes on the edge using the trained YOLOv4 model to detect the potential threat, transmits the threat alert to a Fleet Portal via LoRaWAN, and hosts the alert on a dashboard via a satellite network. The device has been fully tested in the field to ensure its functionality prior to deployment for the SEA Gas use-case. The AIoT smart solution has been deployed across the 10km stretch of the SEA Gas pipeline across the Murray Bridge section. In total, 48 AIoT devices and three Fleet Portals are installed to ensure the line-of-sight communication between the devices and portals.
Full article
(This article belongs to the Section Sensing and Imaging)
Open AccessArticle
Particle-Filter-Based Fault Diagnosis for the Startup Process of an Open-Cycle Liquid-Propellant Rocket Engine
by
Jihyoung Cha, Sangho Ko and Soon-Young Park
Sensors 2024, 24(9), 2798; https://doi.org/10.3390/s24092798 (registering DOI) - 27 Apr 2024
Abstract
This study introduces a fault diagnosis algorithm based on particle filtering for open-cycle liquid-propellant rocket engines (LPREs). The algorithm serves as a model-based method for the startup process, accounting for more than 30% of engine failures. Similar to the previous fault detection and
[...] Read more.
This study introduces a fault diagnosis algorithm based on particle filtering for open-cycle liquid-propellant rocket engines (LPREs). The algorithm serves as a model-based method for the startup process, accounting for more than 30% of engine failures. Similar to the previous fault detection and diagnosis (FDD) algorithm for the startup process, the algorithm in this study is composed of a nonlinear filter to generate residuals, a residual analysis, and a multiple-model (MM) approach to detect and diagnose faults from the residuals. In contrast to the previous study, this study makes use of the modified cumulative sum (CUSUM) algorithm, widely used in change-detection monitoring, and a particle filter (PF), which is theoretically the most accurate nonlinear filter. The algorithm is confirmed numerically using the CUSUM and MM methods. Subsequently, the FDD algorithm is compared with an algorithm from a previous study using a Monte Carlo simulation. Through a comparative analysis of algorithmic performance, this study demonstrates that the current PF-based FDD algorithm outperforms the algorithm based on other nonlinear filters.
Full article
(This article belongs to the Section Fault Diagnosis & Sensors)
Journal Menu
► ▼ Journal Menu-
- Sensors Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Society Collaborations
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal Browser-
arrow_forward_ios
Forthcoming issue
arrow_forward_ios Current issue - Vol. 24 (2024)
- Vol. 23 (2023)
- Vol. 22 (2022)
- Vol. 21 (2021)
- Vol. 20 (2020)
- Vol. 19 (2019)
- Vol. 18 (2018)
- Vol. 17 (2017)
- Vol. 16 (2016)
- Vol. 15 (2015)
- Vol. 14 (2014)
- Vol. 13 (2013)
- Vol. 12 (2012)
- Vol. 11 (2011)
- Vol. 10 (2010)
- Vol. 9 (2009)
- Vol. 8 (2008)
- Vol. 7 (2007)
- Vol. 6 (2006)
- Vol. 5 (2005)
- Vol. 4 (2004)
- Vol. 3 (2003)
- Vol. 2 (2002)
- Vol. 1 (2001)
Highly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Topic in
Agriculture, Forests, Sensors
Metrology-Assisted Production in Agriculture and Forestry
Topic Editors: Heye Bogena, Cosimo Brogi, Christof Huebner, Andreas PanagopoulosDeadline: 30 April 2024
Topic in
Materials, Nanomaterials, Photonics, Polymers, Applied Sciences, Sensors
Optical and Optoelectronic Properties of Materials and Their Applications
Topic Editors: Zhiping Luo, Gibin George, Navadeep ShrivastavaDeadline: 20 May 2024
Topic in
Remote Sensing, Sensors, Smart Cities, Vehicles, Geomatics
Information Sensing Technology for Intelligent/Driverless Vehicle, 2nd Volume
Topic Editors: Yan Huang, Yi Ren, Penghui Huang, Jun Wan, Zhanye Chen, Shiyang TangDeadline: 31 May 2024
Topic in
Applied Sciences, Electricity, Electronics, Energies, Sensors
Power System Protection
Topic Editors: Seyed Morteza Alizadeh, Akhtar KalamDeadline: 20 June 2024
Conferences
Special Issues
Special Issue in
Sensors
Smart Sensors for Remotely Operated Robots
Guest Editors: Liviu C. Miclea, Ovidiu P. Stan, Vlad Muresan, Florin PopDeadline: 30 April 2024
Special Issue in
Sensors
Meta-User Interfaces for Ambient Environments
Guest Editors: Marco Romano, Phillip C-Y. Sheu, Giuliana VitielloDeadline: 20 May 2024
Special Issue in
Sensors
Selected Papers from 20th World Conference on Non-Destructive Testing (WCNDT 2022)
Guest Editor: Seunghee ParkDeadline: 31 May 2024
Special Issue in
Sensors
Novel Sensors and Algorithms for Outdoor Mobile Robot
Guest Editors: Levente Tamás, Andras MajdikDeadline: 20 June 2024
Topical Collections
Topical Collection in
Sensors
Robotic and Sensor Technologies in Environmental Exploration and Monitoring
Collection Editors: Jacopo Aguzzi, Corrado Costa, Sergio Stefanni, Valerio Funari
Topical Collection in
Sensors
Microfluidic Sensors
Collection Editors: Sabina Merlo, Klaus Stefan Drese